Werbung
Mitglied bei Linkstation
Mitglied bei Linkstation

  Feurio CD-Writer Data Base: Brainwave CRD-BP2N  

Writer Name: Brainwave CRD-BP2N
Device-ID: GENERIC CRD-BP2
Interface: SCSI
Writing Speed CD-R: 1x, 2x, 4x, 8x, 12x
Writing Speed CD-RW: 2x, 4x
Buffer Memory: 1800 / 3800 1)
Write Index Marks: Yes
Write UPC-Code: Yes
Write ISRC-Code: Yes
Read Recorder Buffer Occupancy: Yes
Burn 80-Minutes CD-Rs: Yes
Burn 90/99-Minutes CD-Rs: Yes and No: The CD-Rs can maximally be written up to 93:59 . (Only with firmware version higher than: 2.27; if you have an older firmware, you have to update it first)
Overburning: Yes (Only with firmware version higher than: 2.27; if you have an older firmware, you have to update it first)
CD-R Capacity Test: Yes (Only with firmware version higher than: 2.27; if you have an older firmware, you have to update it first)
Read Manufacturer Code: Yes
Write CD-Text: Yes
Burn Data-CDs with Feurio!: Yes
Leave CD Open (Session-at-Once): Yes
Burn-Proof: Yes
Burn Audio CD-Rs: Yes
Track 1, Index 1 > 00:03:00: Yes
Read ATIP Information: Yes
State Of Implantation in Feurio!: The writer is fully supported by Feurio! We have a sample of this writer available, therefore we were able to test and optimize the Feurio! support for this writer in in detail. In particular we are able to test the writer with future updates of Feurio! and can react very well to error messages.

The writer is recommended for use with Feurio!
Web Links:
Specifications: http://www.sannet.ne.jp/BURN-Proof/product/bp2.html
Firmware Updates: http://www.sannet.ne.jp/BURN-Proof/product/downloads-bp2.html
Footnotes:
1)On some CD-Writers the actually usable buffer memory differs from the size of present buffer memory. In this case first the actually usable buffer size and then the size of present buffer memory (taking e.g. from the technical specifications) is shown.
This is caused by the recorder requiring a part of memory for internal purposes or the number of maximum storable sectors is limited.
PRESUMPTION: Another possible explanation would be: Due to the error correction information and other coding a sector occupies much more space (i.e. not 2048/2352 bytes per sector but about 4000 bytes) on the CD than in memory. If the information would be converterd to CD format BEFORE storing them in the buffer, they would correspondingly require more space in the recorder´s buffer memory. This reduces the actually usable buffer size.
Example: Buffer memory = 2048 kb. Size coded sector: 4194 bytes -> 2048*1024/4194 = 500 sectors can be stored in the buffer. But in audio format these 500 sectors only represents 1148 kb (500*2352/1024), so the buffer really stores only 1148 kb audio information, although its physical size is 2048 kb.
 
 

NO WARRANTY will be taken for this information!

And keep in mind that this information may change any time with other firmware versions or production deviations!
If you have found an error or have additions or the parameters of a new CD-Writer, please send an e-mail to: support@feurio.com. Or simpley use the Feedback Form!.

All company and product names are the registered trademarks of the particular manufacturers!

You are the 121. visitor of this page (today: 1)