Feurio CD-Writer Data Base: LG GCE 8320B |
|---|
|
|---|
| Writer
Name: | LG GCE 8320B | | Device-ID: |
HL-DT-ST CD-RW GCE-8320B | | Interface: |
IDE | | Writing
Speed CD-R: | 8x, 16x, 24x, 32x 1) | | Writing
Speed CD-RW: | 2x, 4x, 10x 1) | | Buffer
Memory: | 8065 / 8192 2) | | Write
Index Marks: | Yes | | Write
UPC-Code: | Yes | | Write
ISRC-Code: | Yes | | Read
Recorder Buffer Occupancy: | Yes | | Burn
80-Minutes CD-Rs: | Yes | | Burn
90/99-Minutes CD-Rs: | Yes (Maximum value: 99:59) |
| Overburning: |
Yes | | CD-R
Capacity Test: | Yes | | Read
Manufacturer Code: | Yes | | Write
CD-Text: | Yes | | Burn
Data-CDs with Feurio!: | Yes | | Leave
CD Open (Session-at-Once): | Yes | | Burn-Proof: |
Yes | | Burn
Audio CD-Rs: | Yes | | Track
1, Index 1 > 00:03:00: | Yes | | Read
ATIP Information: | Yes | | State
Of Implantation in Feurio!: | We had a sample of this writer available
for a short time and tested it in detail. No problems did occur during the tests.
Unfortunately we had to send the writer back to the manufacturer, so we will
not be able to test this writer with future versions of Feurio! - therefore we
can not guarantee the perfect support with all (especially future) versions of
Feurio!
Additionally we can not add new features of possible firmware updates to Feurio!
and in particular we are not able to investigate error messages and can only
refer to the manufacturer1 The writer is recommended for use with Feurio! with
some reservations! | Footnotes:
| 1) | Hinweis zur Aufzeichnungs-Geschwindigkeit:
Der Writer ist ein "Zone ZLV-Writer", d.h. die volle Geschwindigkeit wird -
wie von vielen CD-ROMs bereits bekannt - nicht über das gesamte Medium erreicht.
Der Writer teil des Medium in mehrere Zonen ein. Jede Zone wird mit einer konstanten
Geschwindigkeit beschrieben (z.B. Zone 1: 16x, Zone 2: 20x, Zone 3: 24x).
Hierduch ergibt sich eine geringere tatsächliche Aufzeichnungsgeschwindigkeit
als die angegebene Geschwindigkeit. | | 2) | On
some CD-Writers the actually usable buffer memory differs from the size of present
buffer memory. In this case first the actually usable buffer size and then the
size of present buffer memory (taking e.g. from the technical specifications)
is shown.
This is caused by the recorder requiring a part of memory for internal purposes
or the number of maximum storable sectors is limited.
PRESUMPTION: Another possible explanation would be: Due to the error correction
information and other coding a sector occupies much more space (i.e. not 2048/2352
bytes per sector but about 4000 bytes) on the CD than in memory. If the information
would be converterd to CD format BEFORE storing them in the buffer, they would
correspondingly require more space in the recorder´s buffer memory. This
reduces the actually usable buffer size.
Example: Buffer memory = 2048 kb.
Size coded sector: 4194 bytes -> 2048*1024/4194 = 500 sectors can be stored
in the buffer. But in audio format these 500 sectors only represents 1148 kb
(500*2352/1024), so the buffer really stores only 1148 kb audio information,
although its physical size is 2048 kb.
|
| |
NO
WARRANTY will be taken for this information! And keep in mind that this information
may change any time with other firmware versions or production deviations!
If you have found an error or have additions or the parameters of a new CD-Writer,
please send an e-mail to: support@feurio.com.
Or simpley use the Feedback Form!. All
company and product names are the registered trademarks of the particular manufacturers!
You are the 282. visitor of this page (today: 2) Last modified: 22-Jul-08 |
